HST 6250 YS

HOSTAR Model HST6250YS Submersible Hydraulic Boat Trailer for yard use, configured with the following equipment and specifications:

• To handle power boats to 57 feet, sailboats to 65 feet
• Overall trailer length of 50 feet (+ or -)
• Overall trailer width of 9 feet 6 inches
• Yard capacity of 90,000 lbs.
• 16" x 8" x 1/2" welded structural steel tubing main frame, reinforced with 12" x 25 pound channel
• Frame sealed, pressure-tested for air tightness to prevent corrosion
• Gooseneck for fifth-wheel operation
• Hydraulics
    * Six fully adjustable hydraulic arms to handle to up to 8' draft; forward-facing rear arms, inward-canting forward arms
    * Hydraulic raising and lowering of each side of main frame
    * Two forward hydraulic landing wheels mounted on gooseneck
    * Solenoid actuated remote control with hand-held control box and walk-around cable
    * 12VDC electric hydraulic power unit
    * Pilot-operated double-locking valves on all cylinders
• Two 4-DM deep cycle marine batteries
• Battery charger or power connection to tow vehicle
• Six slide-through removable cross beams for keel support
• Cross beam pockets through frame
• Strap hangers with straps for sailboat keels
• Outboard walking beam (hydraulic) suspension (frame lowers to ground)
• Six Dexter 25,000 lb. Heavy Duty Series stub axles
• Six low profile high flotation 32 x 12.1 x 15 yard tires (four at rear; two at front)
• Expanded metal basket at front of trailer
• Stainless steel T-pins and hardware
• Finish: Entire unit sandblasted to white steel; finished with two coats high-build epoxy primer with hardener, three coats high performance acrylic urethane with hardener - choice of color
              Galvanized hydraulic arms, arm inserts, flipper brackets

Production Time: Fourteen to sixteen weeks from start of construction